15w-wheel-loader-1
15w-wheel-loader-2
15w-wheel-loader-3
15w-wheel-loader-4
Wheel Loader

ZHS 15W Wheel Loader

Compact 1.5 t electric wheel loader with 0.6 m3 bucket and 3200 mm dump height, CE certified for tight jobsites. 3200 mm dump height, CE certified for

Specifications

Model
ZHS-15W
Dumping Height
3200 mm / 126 in
Rated Bucket Capacity
0.6 m3 / 0.78 cu yd
Rated Load
1500 kg / 3307 lb
Dumping Reach
600 mm / 23.6 in
Operating Weight
3600 kg / 7937 lb
Overall Dimensions
5200 x 1800 x 2600 mm
Tire Specification
20.5/70-16
Ground Clearance
260 mm / 10.2 in
Wheelbase
2300 mm / 90.6 in
Tread / Track Width
1450 mm / 57.1 in
Steering Angle
35 deg
Min. Turning Radius
4500 mm / 177 in
Transmission Type
265 Split-type
Max. Travel Speed
25 km/h / 15.5 mph
Total Cycle Time
9 s
Axle
Hub-reduction Axle
Brake System
Air Brake
Cab
Standard Luxury Cab
Engine Hood
New Stamped Hood
Engine
Yunnei 42 kW / 56 hp
The ZHS 15W is a 1.5 t rated load wheel loader for contractors and dealers working on urban, yard and access-restricted jobsites. It carries a 0.6 m3 rated bucket to a 3200 mm dumping height with a 600 mm dumping reach, so it loads standard site trucks and hoppers without a long approach ramp.
The whole machine has passed the formal CE certification and all met the testing standards. Established in 2002, ZHS Machinery designs and builds CE-compliant compact machinery featuring electric drive and smart controls for professionals in agriculture, landscaping, and construction.

Who it fits and where it works

The 15W fits landscaping crews, municipal works, plant and warehouse yards, farms, and rental fleets that need a loader compact enough for tight access but strong enough for real material handling. Its 1450 mm tread width and 4500 mm minimum turning radius let it work in yards where a full-size loader cannot turn. Contractors loading export containers, spreading aggregate on driveways, moving pallets and bulk bags inside a covered hall, or cleaning out livestock buildings are the core users.
It is not a replacement for a 3 t class wheel loader on high-volume quarry or bulk earthwork jobs. Rated load is 1500 kg, so plan cycles around that figure rather than around bucket volume alone. If your truck sides are above 3200 mm or your cycle volume needs more than one bucket every nine seconds sustained, a larger machine in the range is the honest comparison.

Construction and how the specification meets the job

Power comes from a Yunnei 42 kW engine through a 265 split-type transmission and a hub-reduction axle. The hub-reduction layout keeps ground speed low and torque high at the wheels, which is what a loader needs when it is pushing into a pile rather than travelling. Maximum travel speed is 25 km/h, enough to move between work areas on one site without a trailer. Air brakes are standard, and the machine sits on 20.5/70-16 tyres with 260 mm of ground clearance.
The standard luxury cab and the new stamped engine hood are both part of the base configuration, so the operator gets a sealed working position and the machine gets a stiffer, easier-to-service hood than a fabricated panel. Overall dimensions are 5200 x 1800 x 2600 mm and the wheelbase is 2300 mm. Those are the numbers to check against your gate widths and ramp geometry before ordering, not after delivery.
Total cycle time is 9 seconds on a full lift-dump-return sequence. Production planning should start from cycle time and bucket fill rather than from travel speed, because on a compact loader the loading cycle, not the road speed, sets output. The 35 degree steering angle and the 1450 mm tread also mean the machine can work inside a standard container-width aisle without needing a turning bay.

What to confirm before you ask for a quote

Five numbers decide whether a 15W is the right machine for you: the narrowest access opening on your site, the height you must dump into, the material and its density, the working hours you need per shift, and the market you will register the machine in. Send those and we can confirm the configuration instead of guessing at it.

How to order

Attachments are quick-change, so tell us which ones you need at the same time as the base machine rather than after the order. ZHS supplies through a global agent network and direct factory orders, with a one-year warranty and support from pre-sales consultation through to after-sales.
Send the five numbers and your attachment list through the quote form on this page. Our team will come back with the configuration, the documentation set for your market, and a delivery schedule.

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

18w-wheel-loader-1
Wheel Loader

ZHS 18W Wheel Loader

● 1800kg Loading Capacity. ● 0.8m³ Bucket Cpacity. ● Cummins & Yanmar Engine Optional. ● 4×4 wheel drive. ● Automatic gearbox. ● Max-30km.hr. ● 30° grade ability. ● Pilot control & robot welding. ● 1year or 2000hours guarantee. ● CE | EUROⅤ | TIER-4 | ISO ● ODM Production is available

View product
20w-wheel-loader-1
Wheel Loader

ZHS 20W Wheel Loader

● 1800kg Loading Capacity. ● 0.8m³ Bucket Cpacity. ● Cummins & Yanmar Engine Optional. ● 4×4 wheel drive. ● Automatic gearbox. ● Max-25km.hr. ● 30° grade ability. ● Pilot control & robot welding. ● 1year or 2000hours guarantee. ● CE | EUROⅤ | TIER-4 | ISO ● ODM Production is available

View product